User Guide

102
Using Navigation
For example, if you wish to navigate from a town
on the Southern Europe CD (D) to a town on the
Northern Europe CD (B), enter your destination
address as usual. After entering the town, you will
be prompted to insert navigation CD No. 1 by the
display
Please insert navigation CD #1.
After inserting the relevant CD, enter the road and,
if required, the house number or the town centre.
The required map data is loaded and stored inter-
nally after route calculation has started.
General instructions
• During route navigation, you can still listen to
the radio, CD or MP3
The distance to the next announcement and the
estimated time of arrival, the current time or the
journey time to the destination are indicated on
the right side of the display.
You can set whether the current time, the
journey time, or the estimated time of arrival is
displayed.
The display mode can be selected by pressing
the last multifunction button. The mode current-
ly set can be seen from the symbol which ap-
pears before the displayed time.
The symbol represents the estimated time of
arrival.
The symbol represents the remaining jour-
ney time.
The symbol represents the current time.
• During route navigation, you can still use the ra-
dio, CD or MP3.
Distance to the next message and estimated time
of arrival are shown on the right side of the dis-
play.
• The unit can be switched to radio mode when
route guidance is in operation by pressing
the button. You can switch to CD mode by
pressing the button.
The Navigation menu automatically displays
when navigation announcements are given.
• When entering the address, only those letters,
digits and symbols which are relevant for the
address are displayed.
The entries are automatically completed.
A space (i.e. in Bad Abbach) is entered as an un-
derscore.
Letter, numbers and symbols can be selected us-
ing the multifunction buttons to .
The individual symbols can be selected by
pressing the appropriate multifunction buttons
repeatedly.
Selection can also be made using the right rotary
control , which will be used in the remainder
of this guide.
• exits the current menu and switches to either
the route guidance display or main Navigation
menu.
• The system recalculates the route if a deviation
is made from the route.
• Briefly press the left rotary control to hear
the current navigation message.
• During a navigation announcement, the volume
can be adjusted with the left rotary control .