Operating instructions

21
GENERAL OPERATION >>>
> D
> GB
> F
> I
> E
> PL
> CZ
> H
> RU
Required configuration of the 3.5 mm
jack plug for connecting an audio cable.
Required configuration of the 3.5 mm
jack plug for connecting a microphone.
Required configuration of the 2.5 mm
jack plug for connecting the telephone
mute cable.
Memory card
Your Navigation device has a slot for a mi-
cro SD memory card.
As the map data is stored in an internal
memory on the Navigation device, the
slot for a micro SD memory card is used
for updates and for playing music*, view-
ing images* or watching videos*.
The memory card can also be used for
supplementing the map data.
The card slot is located on the left on the
underside of the unit. The card slot is
equipped with a spring-actuated locking
and ejector mechanism.
Inserting memory card
> Remove the memory card from its
packaging without touching or soiling
the contact bar.
> Hold the memory card so that the con-
tact strip is facing towards the rear of
the unit.
> Guide the memory card into the card
slot.
> Exert a little pressure and slide the
memory card into the card slot until it
snaps in.
Ejecting memory card
The card slot ejects the card so that you
can pull it out with two fingers.
> Use your finger to gently press the
memory card against the spring force
into the card slot and then release it.
The card is ejected.
> Remove the memory card and place it
in the packaging while ensuring not to
touch contact bar.
L
RGND
Audio
MIC
MIC GND
IN
DET
Mute
GND
*depending on the model, it must be activated via the Content Manager