Operating Manual

45
SETTINGS >>>
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> RUS
> With specify whether new TMC
messages are to be read out automatical-
ly (on or off ).
> With tune to the desired TMC sta-
tion.
System settings
You can change various basic settings for
the Becker® MAP PILOT.
> In the settings menu, select
System
settings
.
The system settings are displayed.
Language
You can set the menu language and the
language for the navigation announce-
ments.
> Select
Language in the system settings.
> Select the desired language.
Design variants
You can select between two different de-
sign variants for the display of the day
skin.
> Select
Design variants in the system
settings.
> Select the desired variant.
Pin protection
You can create a freely definable security
code of between 4 and 10 digits in length
and enable/disable this security code.
> Select
PIN protection in the system set-
tings.
1
2
2
1
2
Note:
When a security code is entered, your
Becker® MAP PILOT is linked with
your vehicle by means of this security
code. If your Becker® MAP PILOT is to
be used in a different vehicle, the security
code must be entered.
For the entry or change of the security
code, the ignition of the vehicle must be
turned on.