User Guide

162
Radio mode
TP Announcement volume
X Selecting TP Menu.
X Press the multifunction button.
X With the right rotary control , four
different settings (
0 - 3) can be select-
ed.
This means that the volume can be
raised by a fixed amount depending on
the setting.
• Setting
0 - no increase
• Setting
1 - slight increase
• Setting 2 - moderate increase
• Setting
3 - strong increase
Switching TMC on/off
X Activating TP Menu.
Switching on:
X Press multifunction button re-
peatedly until TMC on appears.
Switching off:
X Press multifunction button re-
peatedly until TMC off appears.
Selecting TMC station
To improve the reception of TMC traffic
announcements, you can select a station
that transmits the TMC data.
X Switching on TP menu.
X Press the multifunction button.
X Use the right-hand rotary control
to select the desired TMC station.
The selected station is adopted and set.
Note
Further information on TMC can be
found under “Dynamic route guidance
with TMC” on page 137.
Note
With the TMC switched off, no dynam-
ic navigation functions (Dynamic
Route, Traffic Information) can be se-
lected or called up.
Note
You can then also select another station
again without TMC. However, this
eliminates the advantage of the set
TMC-station.