User Guide

106
User settings
Display brightness (Lum)
With this function, the brightness of the
display can be set.
X To set, call up user menu.
X Press the multifunction button.
X With the right rotary control , select
either
0 (dark) or 8 (light).
The setting is stored automatically.
LED setting
This function can be used to switch the
LED function (flashes when the unit is
switched off) on and off.
X To set, call up user menu.
X By pressing multifunction button
select either
blinking (LED
On) or
off (LED Off).
The setting is stored automatically.
Setting reception optimisation
(M/S)
In order to suppress reception-related in-
terference, three different parameters
can be set for reception optimisation.
X To set, call up user menu.
X By pressing multifunction button
, select from
Stereo, Mono
and Auto.
•
Auto - Setting for normal operation,
i.e. depending on reception, the unit
switches back and forth from stereo to
mono (offers the optimum setting for
almost all reception areas).
•
Stereo - Setting for exceptional re-
ception conditions - i.e. the unit is con-
stantly set to stereo.
•
Mono - Setting for reception condi-
tions in which reflections constantly
occur - i.e., the unit is constantly set to
mono.
The setting is effective immediately and
is also retained after power is turned off.