User Guide

61
Navigation mode
If 6HWIUHHO\ is selected, you still need to
select the required setting. The available
range is between 50% and 200%.
A value of 100% indicates the
&DU set-
ting. A later ETA will be calculated if a
higher percentage value is selected.
X Turn the rotary control/push button
to set the required percentage value.
X Confirm your selection by pressing
the rotary control/push button .
Measuring unit
You can convert the calculation of the
distances from metric (display in metres
and kilometres) to imperial (display in
yards and miles) system and vice versa.
X In the Settings menu, select the 8QLWRI
PHDVXUH
entry.
X Confirm your selection by pressing
the rotary control/push button .
X Select 0HWULF or ,PSHULDO (on = ).
2093
Note:
Only one of the two settings may be
active ( ).
2094
2095