User Guide

58
Navigation mode
X Confirm your selection by pressing
the rotary control/push button .
•
7UDIILFPHVVDJHV
You can specify whether or not traffic
announcements should be read out
automatically by the unit and, if so,
which ones.
•
$QQRXQFHDUULYDOWLPH
You can specify whether the calculated
time of arrival should be announced
automatically once the route has been
calculated/recalculated.
•
6KRZVSHHGOLPLWV
If the function is on, the system will
inform you of the maximum permissi-
ble speed limit for the route along
which you are travelling during route
guidance, insofar as this information
is available.
•
(7$VHWWLQJ
You can configure the calculation of
the ETA. ETA stands for Estimated
Time of Arrival.
•
8QLWRIPHDVXUH
You can convert the calculation of the
distances from metric (display in metres
and kilometres) to imperial (display in
yards and miles) system and vice versa.
Traffic announcements
You can specify whether or not traffic
announcements should be read out auto-
matically by the Cascade and, if so,
which ones.
X In the Settings menu, select the 7UDIILF
PHVVDJHV
entry.
X Confirm your selection by pressing
the rotary control/push button .
X You may now select $QQRXQFH PHV
VDJHV
, 2QURXWHRQO\ or :DUQLQJVRQO\.
•
$QQRXQFHPHVVDJHV
If this function is active, all traffic
announcements are made automati-
cally on receipt.
•
2QURXWHRQO\
If you activate this function ( ),
only the traffic announcements rele-
vant to the route are made.
•
:DUQLQJVRQO\
Activate this function ( ) to have
only warnings announced.
X Turn the rotary control/push button
to switch the required function on ( )
or off ( ).
2086
2087
Note:
This setting must be active ( ) in order
to be able to activate the two other
settings.