User Guide

40
Navigation mode
• ,QYLFLQLW\RIORFDWLRQ
You can select a POI in the vicinity of
the vehicle. When you make your
selection, the unit will tell you in
which direction the POI is located and
how far away it is.
•
,QFRXQWU\
You can select a POI for the selected
country from a range of national POI
categories.
•
,QYLFLQLW\RIGHVWLQDWLRQ
You can select a POI in the vicinity of
the destination.
•
,QSODFH
You can select a POI in a specific
town.
Local
X In the POI menu, select the ,QYLFLQLW\RI
ORFDWLRQ
entry.
X Confirm your selection by pressing
the rotary control/push button .
X Turn the rotary control/push button
and then press the rotary control/push
button to select the required POI cate-
gory.
The data entry menu for POIs appears
or, if fewer than 10 POIs are available in
the selected category, the unit switches
directly to the POI list.
X Turn the rotary control/push button
and then press the rotary control/push
button to select each letter one after the
other.
Accept entry:
X In the data entry menu, select the
symbol.
or
X Press the rotary control/push button
and hold it down for at least 2 seconds.
X Turn the rotary control/push button
and then press the rotary control/push
button to select the required POI.
Route guidance to the selected point of
interest is initiated.
Note:
The ,QYLFLQLW\RIGHVWLQDWLRQ entry can only
be selected if route guidance is active.
Old
version
2042
2043
2044