User Guide

141
Settings
The Clock Settings menu appears. The
current time setting appears on the right-
hand side of the display.
X You may now select between &KDQJH
IRUPDW
, )RUZDUG  PLQXWHV and
%DFNZDUGPLQXWHV.
•
&KDQJHIRUPDW
You can switch the time display
format from 12 to 24-hour and vice
versa.
•
)RUZDUGPLQXWHV
You can put the time forward in
intervals of 30 minutes.
• %DFNZDUGPLQXWHV
You can put the time back in intervals
of 30 minutes.
X Press the rotary control/push button
to execute the relevant function.
Software update
A software update for your Cascade can
be carried out by inserting a CD. New
functions for your Cascade can be pro-
vided by means of a software update.
X Insert the software update CD into the
CD slot with the printed side up.
After a short time, the following display
appears:
X Select <HV to install the update or 1R to
continue without updating.
The software update starts when
<HV is
selected.
A progress indicator informs you of the
progress of the installation.
The following message appears once the
update has been completed successfully.
X Press the right-hand rotary control/
push button or wait for the menu
to disappear automatically after a few
seconds.
The Cascade switches itself off briefly
and then back on again.
The software update is now complete.
Note:
Before carrying out an update, switch
the vehicle ignition on and leave it on
during the update.
The Cascade cannot be used during the
software update.
7026
7027
7028