User Guide

138
Settings
External device
You can specify whether an AUX source
or an external hands-free unit is
connected to the Cascade instead of a
CD changer.
X Select ([WHUQDO GHYLFH in the system
settings.
X Select between &' FKDQJHU, $X[ and
([WHUQDOKDQGVIUHH off (on = ).
Reset function
You can reset the Cascade to the factory
settings.
X Select 5HVHWIXQFWLRQV in the system set-
tings.
X You may now select 'HOLYHU\ VWDWXV,
5HVHWVHWWLQJV or 'HOHWHSHUVRQDOGDWD.
•
'HOLYHU\VWDWXV
The Cascade is reset to the factory set-
tings. All settings are reset. Personal
data is deleted.
•
5HVHWVHWWLQJV
All settings made are reset to original
values. Personal data is not deleted.
•
'HOHWHSHUVRQDOGDWD
Personal data is deleted. Settings are
not reset.
X In the following prompt, select <HV to
reset the settings or
1R to continue
without a reset.
A reset is performed if
<HV is selected.
The Cascade switches itself off briefly
and then back on again automatically.
Note:
Only one of the three settings can be
active ( ) at one time.
However, all three functions may be
inactive ( ) at the same time.
If the Cascade recognises that a CD
changer is connected,
&' FKDQJHU is
activated ( ). It is then not possible to
switch the function off manually.
The microphone of the Cascade cannot
be used for external hands-free
operation.
7021
7024