User Guide

132
Settings
Deleting:
X Select 'HOHWH UDGLR or 'HOHWH DGGUHVV
ERRN
.
X When the next prompt appears, select
<HV to delete the entry or 1R not to
delete.
Entries will be deleted or retained on the
basis of the selection.
Voice output
You can configure voice outputs for the
Cascade here.
X Select 9RLFH RXWSXW in the voice mode
settings.
X You may now select the 6LJQDOSULRUWR
YRLFHLQSXW
, &RQILUPYRLFHLQSXW and 'HWDLOHG
YRLFHRXWSXW
functions.
•
6LJQDOSULRUWRYRLFHLQSXW
Once the function has been activated,
in addition to being highlighted on the
Cascade, a beep tone sounds to
indicate that the unit is ready for a
voice command.
•
&RQILUPYRLFHLQSXW
If the function is active, the voice
command is repeated by the Cascade
for confirmation. However, please
note that the voice command repeated
may not tally exactly with the voice
command you entered, but with the
main command. It may be the case, for
example, that you say “end” and the
Cascade repeats “cancel”. In voice
mode, these two commands have the
same meaning.
•
'HWDLOHGYRLFHRXWSXW
If the function is active, in some places
you will receive detailed instructions
(e.g. for entering a destination in voice
mode).
X Turn the rotary control/push button
to switch the required function on ( )
or off ( ).
Extended PTT
If the function is active, voice mode can
be activated automatically by pressing
, , , or
and you can input a voice command
directly.
X Select 377H[WHQGHG in the voice mode
settings.
X Turn the rotary control/push button
to switch the function on ( ) or off
().
7011
Note:
The abbreviation PTT stands for “Push
To Talk”.
7012