User Guide

131
Settings
X For the 5HODWLYH WR DXGLR setting, select
9ROXPH.
X Turn the rotary control/push button
to select the required volume.
Automatic dialogue
You can specify which events should
trigger automatic voice dialogue. Auto-
matic dialogues are automatic queries
from the Cascade after particular events,
for example whether a voice entry is to
be created after a radio station has been
stored.
X Select $XWRPDWLF GLDORJXHV in the voice
mode settings.
X Next, select the required event.
X Turn the rotary control/push button
to switch the required function on ( )
or off ( ).
Voice entries
You can use this function to read out and
delete all voice entries already stored for
the radio and address book functions.
X Select 9RLFHHQWULHV in the voice mode
settings.
Reading out:
X Select 5HDGRXWUDGLRor 5HDGRXWDGG
ERRN
.
The selected voice entries are read out.
Note:
If you have previously selected
5HODWLYH
WR DXGLR
, you can set the volume in the
range between -10 and +10. In this case,
a negative value means that announce-
ments will be made more quietly than
the selected volume for the audio
source.
7008
7009
Note:
The number of voice entries already
assigned appears on the right-hand side
of the display.
7010