User Guide

126
Settings
• $OZD\V
Connection to the external device is
allowed. The function described in
“Always allow connection” auf
Seite 121 will also be activated.
Further connection requests will be
accepted without a query.
If the connection to the external device
is established successfully, another
signal tone can be heard and the
following message appears.
X Press the rotary control/push button
.
A connection has now been established
to the external device.
Disconnecting devices
X Select the device to be disconnected
from the device list.
X Press the rotary control/push button
.
X Select <HV to disconnect or 1R not to
disconnect.
If
<HV is selected, the Cascade will
disconnect the required device.
Calling up Bluetooth settings
X Press .
X Turn the rotary control/push button
anti-clockwise until
%OXHWRRWK
appears at the top right of the display.
X Press the rotary control/push button
.
The Bluetooth device list is displayed.
X Select the %OXHWRRWKPHQX entry.
7040
Note:
A connected device is identified by the
symbol.
7031
7043
7030
7031