User Guide

116
Address book
Then, depending on the settings in
“Always allow connection” on
page 121, the following query is sent or,
if the function is active, this step will be
skipped.
X Select between<HV, 1R and $OZD\V.
•
<HV
Connection of the external device is
allowed.
•
1R
Connection of the external device is
rejected.
• $OZD\V
Connection to the external device is
allowed. The function described in
“Always allow connection” on
page 121 will also be activated.
Further connection requests will be
accepted without a query.
If you have allowed the connection by
means of
<HV or $OZD\V, the address data
will be sent.
$GUHVVH ZLUG ÞEHUWUDJHQ appears on the
display.
Press the rotary control/push button
to abort the transfer. No data will be
transferred.
The following information will be
displayed if the transfer was successful.
X Select between $GG (addresses will be
saved in address book) and
'LVFDUG
(transferred addresses will not be
saved).
The following information will be
displayed if
$GG was selected.
X Press the rotary control/push button
.
6037
6038
6039