User Guide
Navigation CD 2.X
Subject to errors and technical modifications 22 Copyright by Becker GmbH, D-76303 Karlsbad
tion is shown in its entirety. A typical traffic announcement is
shown as follows.
• a motorway or road number
• approximate direction information
• detailed location and direction information
• the incident
• the cause, if known
Scroll marks on the right side of the display indicate that more
than 3 lines are required for the traffic information.
Pressing the button returns to the list of the current
traffic information.
Modifications to radio mode
The following modifications have been made to radio mode:
• Modified operation in radio mode (TrafficProgramme)
• Switching TMC on/off
• Display for receivable TMC stations
Traffic Programme (TP)
If an RDS diversity transmitter transmits TP announcements,
it is possible to interrupt CD, CDC/AUX, MW, LW or SW
operation or the mute function and to switch through the
transmitted TP announcement. Moreover, you can listen to
one FM station while having TP announcements switched
through that are transmitted by another FM station.
There are two ways to select a TP transmitter:
- automatic tracking
- direct programming
Automatic tracking always uses the FM station currently be-
ing received as the TP transmitter. If the selected FM station
has poor reception quality or cannot function as a TP trans-
mitter, the unit applies specified criteria to search for a new
TP transmitter.
?0;;/4(9:*/,5
?0;,04-,3+
46-8<,<05.;9(--0*
1$9