User Guide

Subject to errors and technical changes 55 Copyright by Becker GmbH, D-76303 Karlsbad
Installation Guide
Delete calibration (Calibration)
If the navigation system is removed from one vehicle and installed in
another, the calibration must be performed again. However, to do so, the
current calibration data must be deleted.
In the Service Mode, select
Calibration with the right rotary
control and press to confirm.
With the right rotary control, select
Delete and press to confirm.
The calibration is deleted and the unit returns to the Service Mode.
Status of the calibration journey (
Calibration ride)
In the Service Mode, select
Calibration ride with the right rotary
control and press to confirm.
The calibration status (i.e.
Status: 2) and the type of positioning
(i.e.
3D) are displayed. After calibration is completed, instead of Rad
and
Backwards, the street currently being driven on is displayed
(provided it is included in the digital map).