User Guide

Subject to errors or technical changes 40 Copyright by Becker GmbH, D-76303 Karlsbad
Installation Guide
7. Installation of the GSM/GPS Box
The connectors for the combination GSM/GPS antenna, the optional operating headset and connecting cable to the
OnlinePro are to be connected to the GSM/GPS Box. The SIM card necessary for activation and operation of the telephone
must be inserted into the card-holding slot.
The GSM/GPS Box can be installed in the glove compartment, for example. However, an installation position allowing a
maximum possible distance from the Online Pro should be selected.
On the housing of the GSM/GPS Box, there are two Velcro strips F for attachment.
Install the lead in such a manner that it cannot be pinched, bent or pulled out.
The GSM/GPS Box should be installed in such a way that the SIM card inserted into the SIM card holder can be taken out
without having to remove the GSM/GPS Box.
Side view,
left
GSM/GPS Box
Side view,
right
A: Retaining cover over SIM card holder
B: Connection socket for connection
cable to OnlinePro
C: Connection for optional
operating headset
D: GPS antenna connection
E: GSM antenna connection
F: Velcro strip for attachment
A
B
C
D
E
F
F