User Manual

ManualsBrandsBECA ManualsWireless Thermostatbeca BHT-8000RF Wireless Thermostat

Note: When the display panel powered by battery, after 20 seconds of no

operation, the LED screen would turn off and enter to the energy-saving state,

the APP will be locked, click on the APP to unlock the APP; To wake up the

display again ,press .

5. Programming Set：

WiFi version can be set in APP.

Non-wifi version, press 4 times to enter the programming mode setting. At

this time, the screen displays (MON.TUE.WED.THU.FRI), the "minute" of the time

flashes, and the period 1 . Press again to select and set the hour,

temperature, and period. Press / to adjust the corresponding value.

Press once more to confirm and exit.

4. Time Set: press to enter time setting, press / to adjust the value,

respectively for minutes, hours, and days (the screen displays "1" for Monday, "2"

means Tuesday, and so on) for setting. After the adjustment is complete,

press to exit the time setting

WiFi version, the local network time will be automatically synchronized when

connecting to the network for the first time.

3. Temp. Set: Press / to set the temperature. Only in manual mode, the

temperature can be set arbitrarily.

2、Manual & programming mode：Press to switch manual mode and

programming mode .

Manual mode: the user sets the temperature by himself;

Programming mode: The thermostat will control the temperature according to

the preset value. See "Programming Set" for details.

BHT-8000RF Wireless Thermostat

Thank you for choosing our products!

IN THE BOX YOU WILL FIN D

Display panel*1 Receiver*1 Bracket*1

Screw*2 QC passed*1 Manual*1 USB*1

ABOUT YOUR THERMOSTAT

BHT-8000RF is suitable for electric heating, water heating, wall-hung

boilers and boiler temperature control systems.

It can be used in smart homes, shopping malls and industrial sites.

Before use, please confirm the specific model of this product and the

corresponding heating equipment.

Please refer to the wiring diagram to identify the model or contact the

merchant.

Note: The USB and Battery could not supply power in the same time

,you could only select only one of them.

FEATURES

1. No need cassette or punch for installation;

2. Move LED panel can be moved at your will;

3. Temperature control accuracy (±0.5℃);

4. Support power-off protection, data will not be lost

5. Programming mode, 6 periods a day. Programmable setting, ECO,

cost-saving, smarter and more environmentally friendly;

6. Support:

Tmall, Amazon echo, Google Home, Yandex Alice,

Xiaomi Smart, Xiaodu Smart;

MODEL DEFINITION

GA: Water heating, 5A

GB: Electric floor Heating, 16A

GC: Water/Gas Boiler, 5A

GBC：Electric floor Heating, 16A & Water/Gas Boiler, 5A

W: Support APP wifi control

Example:

BHT-8000RF-GAW

TECHNICAL DATA

DIMENSION

BEFORE WIRING AND INSTALLING

Unit: mm

130.0

90.0

17.5

60.0

1. Be sure it is suitable for your heating equipment before installation;

2. Be sure to keep the power off before installation or maintenance;

3. Please strictly follow the wiring diagram for wiring installation;

4. When installing to the wall, make sure it is fastened

5. Do not pull the cable hard, it may damage the product;

6. When using a hard plastic wire ,please bend it to an appropriate angle ;

7. Only Professionals recommended;

8. Please contact the after-sales service for equipment failure, do not

repair it yourself;

9. After installation, please refer to this manual to check again to ensure

normal safety

WIRING

INSTALLATION

HOME SCREEN QUICK REFERENCE

1. The wifi version can display weather information. When it is frist time

connected wifi, the weather data is uploaded to the thermostat after it

working for 3-4 minutes. The weather would be updated every 30 minutes

after connecting to wifi。

2. When WiFi connected，click the / button to display the current humidity

in the upper left corner

DISPLAY PANEL OPERATION

When the display panel is powered by USB, the APP will not be locked.

The display panel uses 2*AA for power supply. If the battery voltage is insufficient,

the screen will display a icon. Please replace the battery in time.

The display panel power-off and receiver quick power-off are independent of

each other.

Default settings for program schedule：

Setting the Functions and Options

When the display panel is off , press and at the same time for 5

seconds to enter the advanced selection setting. Press to select the

function, press or to adjust the corresponding value. All advanced

option settings will take effect automatically after restarting the thermostat.

LED panel installation steps:

1. Remove the battery cover

2. Install two 5A batteries

3. Install the battery cover

4. Fix the traceless hook on the wall ,then hang the product

Outdoor humidity

Unfreezing Weather

Period

Week

Temp.Display

Programming

Manual

DownUpPower

on/off

Mode Clock

Outdoor wind speeds

Set Temp.

Low battery warning

RoomTemp.

Heating



Time

display

MON.-FRI.

(①②③④⑤ shows

on scteen)

SAT.

(⑥shows on scteen)

SUN.

(⑦shows on scteen)

TEMP. TEMP. TEMP.

TIMETIMETIME

Receiver

Power Supply

95～240 V AC，

50～60 Hz

Receiver

Current Load

5 A(water heating/

waterboiler/gas boiler)；

16 A（electric heating）

Sensor NTC3950,10KTemp. Error ±1℃

Timing Error <1%

Set Temp.

Range

5～45℃

Working

Ambient Temp/

Humidity

0～45℃，5～95% RH

（Non Condensing）

Power

consumption

<1.5W

LED Panel

Material

PC+ABS（Fireproof）

Protection Class

IP20

Buttons

Capacitive Touch

Buttons

Screen

LED

Receiver

Installation

Wall-mounted

LED Panel

power supply

2*AA battery/USB

Temperature

control accuracy

0.5℃

RECEIVER OPERATION

1. Power: Press the "left button" to control the receiver on/off. When the

Power light is on, it means it is turned on, otherwise it is turned off.

2. When the receiver is turned

on, press and hold the "right button" to enter

the code matching between the display panel and the receiver. At this time,

IP Seting flashes red, see the following "Setting the Functions and

Options" for details

When the receiver is off, long press the "right button", the receiver enters

the Wi-Fi network configuration state, the Wi-Fi light will flash quickly

(AP mode) or the Wi-Fi light will display slowly (EP mode), see the wifi

connection process below for details.

RECEIVER

99.0

86.0

24.2

60.0

Power

Load

Wifi

Seting

Suitable for electric heating/water heating/wall-hung boiler/boiler

Electrical Shock or Equipment Damage Hazard,

can shock individuals or short equipment

circuitry.Disconnect power supply

before installation.

CAUTION

Note:

Item 1.2.3 of Setting the Functions and Options is the code matching

connection setting of the display panel and the receiver.

Code matching connection steps: 1. The first item is set to 1; the second item

is the serial number of the thermostat 0-99, as long as the serial numbers of

the two thermostats are different; the third item does not need to be set.

After the display panel completes the above operations, when the receiver is

turned on, press and hold the right button for 5 seconds, and the IP Seting

flashes red light to indicate the start of code matching, and the steady red

light indicates that the code matching is completed.

Then check the 3rd item of the advanced options on the display panel, and

1 is displayed, indicating that the code is matched successfully.

Code Function Default

Code confirmation

Device ID

Code Matching

Succeeded

Temperature

compensation

Deadzone Temp.

Min.Set Temp.

Max.Set Temp.

Standby

Brightness

Energy saving

Mode

Energy saving

Temp.

Restore factory

settings

Version NO.

5℃

35℃

U1 start number,

U1... UA... UF

Setting and options

00：No code matching

01：start code matching

0-99

only reading.

00: code matching failed

01: code matching succeed

-9~9℃

1~5℃

5~15℃

15~35℃

0~7

00:OFF

01:ON

5~30℃

00: normal mode,

01: factory mode

1. Power: Press the to turn on/off of the LED display panel.

6:00~8:00 20 20 20

8:00~11:30 15 20 20

11:30~13:00 15 20 20

13:30~17:00 15 20 20

17:00~22:00 22 20 20

22:00~6:00 15 15 15

6:00~8:00

8:00~11:30

11:30~13:00

13:30~17:00

17:00~22:00

22:00~6:00

6:00~8:00

8:00~11:30

11:30~13:00

13:30~17:00

17:00~22:00

22:00~6:00

Period 1

Period 2

Period 3

Period 4

Period 5

Period 6

Dry Contact

LOAD

Open

16A

GA GB GC

GAB GBC GAC

Note: Only for normally closed valves

Power supply: 95~220V, 50/60Hz;

maximum load : 16A ,for electric heating film, cable, tile.

maximum load : 3A, for water valve actuator ;

maximum load : 3A, for wall-hung boiler;

Open

LOAD

16A

Dry Contact

DISPLAY PANEL

Standby Brightness: ( recommend Max 4 ,if too high ,the LED light would

damager , and the LED life time would ne short)

Summary of content (2 pages)

PAGE 1
Temperature 0.5℃ control accuracy Sensor NTC3950,10K ±1℃ Set Temp. Range <1% Working 0～45℃，5～95% RH Power Ambient Temp/ （Non Condensing） consumption Humidity LED Panel Material PC+ABS（Fireproof） Protection Class IP20 Screen CAUTION WIRING Power supply: 95~220V, 50/60Hz; maximum load : 16A ,for electric heating film, cable, tile. maximum load : 3A, for water valve actuator ; maximum load : 3A, for wall-hung boiler; <1.
PAGE 2
ABOUT WIFI Note that the wifi link process needs to be operated after the display panel and the receiver are connected with the code. Method 2: Ordinary distribution network guidance (Fig. 2. 1&Fig. 2.3.1) Network distribution mode 1. EZ Mode With the receiver turned off, press and hold the "right button" until the wifi light of the receiver flashes quickly, and then operate according to the following figure (Fig 2.4-Fig 2.7).