User manual

-20-
3.2.2.6. Syslog
This system supports syslog sent to a remote syslog server. Currently system
will do syslog for 3 events: cold start, warm start And link change. In this page,
user needs to setup the following parameters to activate the syslog: Syslog
server IP: The IP address of remote syslog server .Log level:
 None: never send syslog message to syslog server, and Max Age
parameters of the root bridge, regardless of how it is configured.
 Major: only send major syslog to syslog server, e.g.: link up/down, system
warm/cold start.
 All: send all syslog messages to syslog server.
Then click Apply button to activate the syslog function. The following example
figure shows the syslog server application (e.g. Tftpd32.exe) got the messages
from switch which link status is changed on port13.
3.2.2.7. Firmware Update
This system supports firmware update through two different ways: TFTP and
HTTP.
TFTP Update
Use this page to assign a TFTP server IP address and an existing firmware