User manual

-11-
 Syslog Setting
 Firmware Update
 Configuration Backup
3.2.2.1. IP Address Setting
User can see and modify the IP address, subnet mask and default gateway in
this page, then clicks “Apply” button to confirm (save) the settings, then the
switch reboot must be done to activate the updates. The IP address can be
statically set or dynamically be assigned by the DHCP Server.
NOTE: If any of the value is changed in this field, reboot is necessary.
3.2.2.2. Switch Setting
Basic
All information in Basic is read only, user can’t modify the contents.
 Model Name: Display the switch’s model name.
 Description: Display the name of device type.
 MAC Address: The unique hardware address assigned by manufacturer
(default)
 Firmware Version: Display the switch’s firmware version.