Users Manual Part 2

Device Configuration
Advanced Setup – QoS
122
BEC 4700A / 4700AZ User Manual
o Example: Share Bandwidth, Bandwidth set to 100Mbps, Internal IP Address:
192.168.1.100-104 (total of 5).
Result: IP 192.168.100-104, those 5 devices will share bandwidth of 100Mbps.
 Bandwidth per Host – Each of the LAN devices within the internal IP address/range obtain the
specific bandwidth configured below.
o Example: Bandwidth per Host, Bandwidth set to 50Mbps, Internal IP Address:
192.168.1.100-104 (total of 5).
Result: The IP address/device, 192.168.100-104, each will obtain up to 50Mbps
bandwidth/data to access to the Internet.
Bandwidth (Mbps): Specify the bandwidth for this application.
DSCP Marking: Differentiated Services Code Point (DSCP), it is the first 6 bits in the ToS byte. DSCP
Marking allows users to classify the traffic of the application to be executed according to the DSCP
value.
Protocol: Select a protocol from the drop-down list
Internal IP Address: The IP address values for Local LAN devices you want to give control.
 Internal Port: The Port number on the LAN side, it is used to identify an application.
External IP Address: The IP address on remote / WAN side.
 External Port: The Port number on the remote / WAN side.
Click Save to apply settings.
To Remove a Policy: Simply select the Index then hit the Delete button to remove from the list.