Users Manual Part 2

Device Configuration
Advanced Setup – QoS
121
BEC 4700A / 4700AZ User Manual
SW QoS Rule
Rule Index: Index marking for each rule up to maximum of 16.
Application: Assign a name that identifies the new QoS application rule, e.g. FTP, HTTP, etc.
Direction: Shows the direction mode of the QoS application
 WAN Interface: Select a WAN interface connection to allow external access to your internal
network.
QoS Type: Choose Limited (Maximum) or Guaranteed (Minimum) to specify the date rate is allowed
for this policy.
 Priority: Set the priority given to each policy/application. Specify the priority for the use of
bandwidth. You can specify which application can have higher priority to acquire the bandwidth.
Its default setting is set to High. You may adjust this setting to fit your policy / application.
Bandwidth Type: It is available when select Limited (Maximum) of QoS Type.
 Share Bandwidth – The specific bandwidth, can be configured below, is shared by all devices
within the internal IP address/range.