User manual

Introduction
2
BEC 9800VN User Manual
protocol stacks either independently or in a hybrid form. The hybrid form is commonly implemented in
modern operating systems supporting IPv6.
Quick Start Wizard
Support a WEB GUI page to install this device quickly. With this wizard, simple steps will get you
connected to the Internet immediately.
Firmware Upgradeable
Device can be upgraded to the latest firmware through the WEB based GUI.
Features & Specifications
• WAN Interface supports up to 1000Mbps downstream and upstream wire-speed (over 900Mbps)
rates
• Dual WAN ports (SFP Cage & Ethernet WAN)
• SFP interface supports 100Base or 1000Base fibre connectivity
•
Extra Rj-45 EWAN WAN port for connecting to ADSL/VDSL/Cable/Fibre modem devices
• 4-port Gigabit LAN Switch
• IPv6 ready (IPv4/IPv6 dual stacks)
• Auto failover feature to ensure an always-on WAN connectivity
• 802.11 wireless AP with high-speed wireless connection rate of up to 300Mbps
• Support Wi-Fi Protecyed Setup (WPS) and WPA-PSK/WPA2-PSK
• Multiple wireless SSIDs with wireless guest access and client isolation
•
Wi-Fi Protected Access (WPA-PSK/ WPA2-PSK) and Wired Equivalent Privacy (WEP)
• Two FXS ports for connecting to regular telephones
• Supports FAX Transmission: T.38 fax relay, G.711 pass-through
• QoS for traffic prioritization and bandwidth management
Network Protocols and Features
•
IPv4, IPv6, IPv4 / IPv6 dual stack
•
NAT,PAT, static(v4/v6) routing and RIP-1/2
•
IPv6 stateless / stateful address auto-configuration
•
IPv6 router advertisement
•
IPv6 over PPP
•
DHCPv6
•
Universal Plug and Play (UPnP) compliant