User manual

BEC 9800VN Wireless-N VoIP Active Ethernet Fiber Gateway
5
Hardware Installation
1. Power Connection
1.1 Using the DC Power Adaptor
Plug in the supplied power adapter to the wall jack, the other side to the 9800VN then power
ON the 9800VN by pressing the Power On/Off button.
.
1.2 Using a PoE Injector
Connect a RJ-45 Ethernet cable to LAN Port 4 (known as the PoE port) and the other side
to a PoE injector then power OFF the 9800VN.
IMPORTANT: The PoE Injector / device MUST comply with IEEE802.at standard. Using an 802.af
standard PoE device will reduce the performance of BEC 9800VN.