User manual

BEC 9800VN Wireless-N VoIP Active Ethernet Fiber Gateway

Rear Panel Connectors

PORT

MEANING

Antenna

Screw the supplied Wi-Fi antennas onto the antenna connectors on both sides.

Phone (1~2)

Connect your analog phone to the phone port with a RJ-11 cable.

USB

Connect an external USB dongle / hard drive for storage, network sharing, etc

SFP Cage

Insert and gently push the SFP module until it snap into the slot tightly.

Auto-sensing SFP (Small Form Factor Pluggable) transceivers 100Base or

1000Base

Gigabit

LAN Ethernet

(1 ~ 4)

Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the four LAN ports when

connecting to a PC or an office/home network of 10Mbps /100Mbps /1000Mbps

4/PoE

LAN Port 4 is also featuring 802.3at PoE PD (Power over Ethernet)

Gigabit EWAN

Connect to Fiber/ Cable/ xDSL Modem with a RJ-45 cable

Reset

After the device is powered on, press it 6 seconds or above: to restore to factory

default settings (this is used when you cannot login to the router, e.g. forgot your

password)

WPS &

Wireless On/Off

By controlling the pressing time, users can achieve two different effects:

(1) WPS

: Press &hold the button for less than 6 seconds to trigger WPS function.

(2) Wireless ON/OFF button: Press & hold the button for more than 6 seconds to

On/Off the wireless.

Power

Connect the supplied Power Adapter to this port.

Power Source

Power ON/OFF switch

(1) with Power Switch ON: power up by the supplied DC power adaptor.

(2) with Power Switch OFF: power up by a PoE

* Note: 1. For WPS configuration, please refer to the WPS section in the User Manual.