User manual

BEC 9800VN Wireless-N VoIP Active Ethernet Fiber Gateway

Step 3: Setup Wireless Connection

Step 4: WAN / Internet Connection Setup

Select the appropriate WAN protocol then fill out the information provided by your ISP in all

relevant parameters.

Step 5: Save Confirmation Settings

Click “Next” to save and complete the Quick Setup.

You should now be able to access to the Internet.

Please see the relevant sections of User Manual for detailed information.

Troubleshooting

1. None of the LEDs are on when you turn on the router.

Check the connection between the adapter and the router. If the error persists, you may have

a hardware problem. In this case you should contact technical support.

2. You have forgotten your router login and/or password.

Access Point: select Activated

SSID: Assign an unique name

Channel: pick from 1~11

Security Type: select a mode

- Disable (No security)

- WPA

- WPA2 (Most secure one)

- WPA / WPA2 (auto detect WPA mode with wireless

clients)

- WEP (Less secure one)

Pre-Shared Key: key for wireless authentication

- WPA / WAPA2 Share Key: Assign a key between 8

~ 63 characters.

- WEP: select Open System, use default WEP Key 1

then assign 26 Hex codes

Next Step: click Next

Protocol: select one of them

- Dynamic IP Address (Obtain an IP

automatically)

- Static IP Address (Manually assign an IP)

- PPPoE

- Bridge Mode

Net Step: click Continue