User manual

QoS - Quality of Service

QoS helps you to control the data upload trafc of each application from LAN (Ethernet) to WAN

(Internet). It facilitates you the features to control the quality and speed of throughput for each

application when the system is running with full upstream load.

QoS Enable: Check to activate QoS function and the following eld will be available.

Note: You can enable QoS function in WAN Conguration pages by checking “Enable

Quality of Service.” check box (refer to Layer2 Interface section).

Select Default DSCP Mark: Select the default DSCP mark from the listbox. Differentiated

Services Code Point (DSCP) is the rst 6 bits in the ToS byte. DSCP Mark allows users to classify

the trafc of the application to be executed according to the DSCP value.

Click Apply/Save to conrm the settings.