User manual

Destination IP address: This is an Address-Filter used to allow or block trafc to particular IP

address(es). Enter the IP range that you want to lter. If only the rst IP block is lled, it means

only that IP entered will be targeted. If you leave both IP blocks empty, it means any IP address.

Destination Subnet Mask: Type the subnet mask associated with the Destination IP address.

Destination Port (port to port:port): This is the Port Range that denes the port of the

application.

Interfaces: Check the check box to select the interface for this rule.

Click Apply/Save to set the new settings and you will be returned to the Incoming IP Filtering page.

Remove: To delete the IP ltering rule from the table, check Remove checkbox then click Remove

button to delete the selected item.