User manual
IP over Ethernet
Select WAN service type: Click IP over Ethernet radio button.
Enter Service Description: You are allowed to enter the user dened name for this service.
Click Next to go to next step.
IPv4 Protocol: Select the appropriate protocol. There are 2 options: Obtain an IP Address
Automatically and Fixed IP Address.
Option 60 Vendor ID: Enter the associated information provided by your ISP.
Option 61 IAID: Enter the associated information provided by your ISP. You should input 8
hexadecimal numbers.
Option 61 DUID: Enter the associated information provided by your ISP. You should input
hexadecimal number(s).
Option 125: Check Enable or Disable this function. Default setting is Disable.
WAN IP Address: Enter your IP address to the device provided by your ISP. If Fixed IP Address is
selected in the IPv4 Protocol eld, default value 0.0.0.0 will display in this eld.
WAN Subnet Mask: Enter your submask to the device provided by your ISP. If Fixed IP Address is
44