User manual

28
Link Power State: Shows link output power state.
Upstream: Upstream rate.
Downstream: Downstream rate.
Line Coding(Trellis): Trellis On/Off.
SNR Margin (0.1 dB): This shows the Signal to Noise Ratio (SNR) margin.
Attenuation (0.1 dB): This is estimate of average loop attenuation of signal.
Output Power (0.1 dBm): Total upstream output power.
Attainable Rate (Kbps): The sync rate you would obtain.
Rate (Kbps): Current sync rate.
Super Frames: Total number of super frames.
Super Frame Errors: Number of super frames received with errors.
RS Words: Total number of Reed-Solomon code errors.
RS Correctable Errors: Total number of RS with correctable errors.
RS Uncorrectable Errors: Total number of RS words with uncorrectable errors.
HEC Errors: Total number of Header Error Checksum errors.
OCD Errors: Total number of out-of-cell Delineation errors.
LCD Errors: Total number of Loss of Cell Delineation.
Total Cells: Total number of cells.
Data Cells: Total number of data cells.
Bit Errors: Total number of bit errors.
Total ES: Total Number of Errored Seconds.
Total SES: Total Number of Severely Errored Seconds.
Total UAS: Total Number of Unavailable Seconds.
xDSL BER Test: Click this button to start a bit Error Rate Test.
Reset Statistics: Click this button to reset the statistics.