User manual

The Rear Ports
Port Meaning
1 Power Connect it with the supplied power adapter.
2 Power Switch Power ON/OFF switch.
3 USB Connect the USB cable to this port (BEC 8800N only).
4 Reset
Press this button for 3~5 seconds to restore the device to its
default mode.
Note: Be sure that the device is being turned on when
press Reset button.
(If you cannot login to the router or forget your Username/
Password, press this button for 3~5 seconds).
5
Ethernet
1X - 4X
(RJ-45 connector)
Connect to a PC or an ofce/home network of 10Mbps or
100Mbps using the provided RJ-45 Ethernet cables.
6
WAN
(RJ-45 connector)
WAN Gigabit Ethernet port. Connect to a Cable modem,
VDSL, FTTH, etc using a RJ-45 cable.
7 DSL
Connect the supplied RJ-11 (“telephone”) cable to this port
when connecting to the VDSL/ADSL telephone network.
8