User manual

Quick Start Guide
2
Front Panel LEDs
LED
DESCRIPTION
Power
System is up and ready
Boot failure
Battery
UPS is functional properly
UPS battery failure. Need to replace a new battery
UPS AC power failure and battery functional properly
Device powered by the DC power adaptor
EWAN
BEC 6300VNL is successfully connected with a broadband connection device.
Transmission speed is at Gigabit speed (1000Mbps)
Transmission speed is at 10/100Mbps
Data being transmitted/received
Ethernet Port
LAN 1 ~ 3
Transmission speed is at Gigabit speed (1000Mbps)
Transmission speed is at 10/100Mbps
Data being transmitted/received
USB
Connecting to a USB dongle or a hard drive.
Wireless/WPS
Wireless connection established
Data being transmitted / received
WPS configuration is in progress
Phone
Successfully registered and ready to be used.
Phone is off-hook, in-use
LTE
(Received
Signal
Strength
Indicator)
RSSI greater than -69 dBm. Excellent signal condition
RSSI from -81 to -69 dBm. Good signal condition
RSSI from -99 to -81 dBm. Fair signal condition.
RSSI less than -99 dBm. Poor signal condition.
No signal and the 4G_LTE module is in service
No LTE module or LTE module fails
Internet
IP connected and traffic is passing thru the device.
IP request failed.
BEC 6300VNL is either in bridged mode or WAN connection not ready.