User manual

Product Overview

BEC 6300VNL User Manual

Rear Panel Connectors

* Note: 1. For WPS configuration, please refer to the WPS section in the User Manual.

PORT

MEANING

Antenna

Screw the supplied Wi-Fi antennas onto the antenna connectors on both sides.

SIM Card Slot

Insert the mini SIM card (2FF) with the gold contact facing down.

Push the mini SIM card (2FF) inwards to eject it

Phone (1X-2X)

Connect your analog phone to this port with a RJ-11 cable.

USB

The USB can either setup for 3G/4G LTE internet access or storage/file sharing.

(1) For File Sharing: Connect an external USB dongle / hard drive for storage,

network sharing, etc

(2) For 3G/4G LTE Internet Connection: Connect with an external USB 3G/4G LTE

modem or dongle with an activate data plan (internet access).

Gigabit

LAN Ethernet

(1~3)

Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the four LAN ports when

connecting to a PC or an office/home network of 10Mbps /100Mbps /1000Mbps

Gigabit EWAN

Connect to Fiber/ Cable/ xDSL Modem with a RJ-45 cable

UPS Jack

The 4-pin connectors are used to power the device with an external UPS battery

backup.

Reset

After the device is powered on, press it 6 seconds or above: to restore to factory

default settings (this is used when you cannot login to the router, e.g. forgot your

password)

WPS &

Wireless On/Off

By controlling the pressing time, users can achieve two different effects:

(1) WPS

: Press &hold the button for less than 6 seconds to trigger WPS function.

(2) Wireless ON/OFF button: Press & hold the button for more than 6 seconds to

On/Off the wireless.

Power Jack (DC)

Connect the supplied Power Adapter to this jack.

Power Source

Power ON/OFF switch

(1) with Power Switch ON: power up by the supplied DC power adaptor

(2) with Power Switch OFF: power up by the UPS battery unit