User manual

Advanced Configuration /
WAN
77
BEC 6200WZL User Manual
Main Port - 3G / 4G
The router allows you to insert a 3G / 4G S I M card into to the built-in SIM slot, enabling you to use a,
UMTS, GSM, or LTE Internet connection.
IP Pass-through Mode: When enabled, BEC 6200WZL is in bridge mode that it does not obtain a
WAN IP address; features such as routing capabilities, NAT, firewall, etc, are being disabled. The
client router that is behind the BEC 6200WZL now obtains a WAN IP address. When disabled, BEC
6200WZL is in router mode that it handles a WAN IP address and all features become available.
Usage Allowance: When enabled, you can control and manage your mobile usage. Please click
here for detailed setup instruction.
LTE Antenna Diversity: When enabled, the auxiliary antenna will be activated. With disabled, only
the primary antenna is receiving and transmitting data.
NOTE: When using Yagi antenna, please DISABLE the Antenna Diversity feature for utmost performance.
IMS Mode: (for Mobile Service Provider used only)
Network Mode: If you know the appropriate Network mode you need to connect to, please select it
from the list; otherwise, select “Automatic.
ISP Mode: A list of 3G / 4G service providers that is available.
TEL No.: The dial string to make a GPRS / 3G user internetworking call. It may be provided by your
mobile service provider.
Dual APN: Our 3G/4G router provides your either Single APN (one WAN IP) or Dual APN (dual WAN
IP) to meet users’ different demands. Enter corresponding APN(s) from your service providers.