User manual

Advanced Configuration /
LAN
64
BEC 6200WZL User Manual
Wi-Fi Protected Setup (WPS) Example II:
PIN Method (Personal Information Number): Configure AP as Enrollee
Use Ralink Wireless Utility for example.
1. Launch to BEC 6200WZL GUI, go to the WPS configuration section to change WPS Role to
Enrollee then press the Start button for activation.
2. Write down the WPS PIN (e.g. 25879810) from the BEC 6200WZL.
3. Now, go back to the Ralink Utility
- Change the Config Mode to Registrar
- In the PIN code box, enter the WPS PIN from BEC 6200WZL (e.g. 25879810)
- Find the SSID of your BEC 6200WZL (e.g. Billion_AP) from the WPS AP List column.
- Press the PIN button to run the scan and connect with BEC 6200WZL
If successful, the BEC 6200WZL Wireless SSID and the security setting will be identical with the
Ralink Wireless Utility.