User manual

Advanced Configuration /
LAN
55
BEC 6200WZL User Manual
Configuration
Click to access and configure the available features in the following: LAN, WAN, System, Firewall,
QoS, Virtual Server, Wake on LAN, Time Schedule, and Advanced.
These functions are described in the following sections.
LAN (Local Area Network)
Here are the features under Interface Setup: Ethernet, IP Alias, Wireless, Wireless Security, WPS,
and DHCP Server.
Ethernet
The router supports more than one Ethernet IP addresses in the LAN, and with distinct LAN subnets
through which you can access the Internet at the same time. Users usually only have one subnet in
their LAN. The default IP address for the router is 192.168.1.254.
IP Address: The IP on this router, default is 192.168.1.254.
Netmask: The subnet mask on this router.
RIP: RIP v1, RIP v2 Broadcast, RIP v1+v2 Broadcast and RIP v2 Multicast.
IP Alias
This function allows the creation of multiple virtual IP interfaces on this router. It helps to connect two
or more local networks to the ISP or remote node. In this case, an internal router is not required.
IP Address: Specify an IP address on this virtual interface.
Netmask: Specify a subnet mask on this virtual interface.