User manual

Basic Configuration /
WAN Connection
37
BEC 6200WZL User Manual
PPPoE
PPPoE (PPP over Ethernet) provides access control in a manner similar to dial-up services using PPP.
Protocol: The current ATM protocol in the device
Username: Enter the username provided by your ISP. You can input up to 128 alphanumeric
characters (case sensitive). This is in the format of “username@ispname” instead of simply
“username”.
Password: Enter the password provided by your ISP. You can input up to 128 alphanumeric
characters (case sensitive).
Service Name: Enter a name for this connection.
IP Address: Your WAN IP address. Leave this at 0.0.0.0 to automatically obtain an IP address from
your ISP.
Auth. Protocol: Default is in Auto mode which the setting will be assigned by your ISP either using a
Chap or Pap.