User manual

Introduction
10
BEC 6200WZL User Manual
Hardware Specifications
Physical interface
• 3G / 4G: 2 antennas• Ethernet: 4 x 10 / 100Mbps Auto-MDI / MDI-X RJ-45 Ethernet ports
• WAN: 1 x 10 / 100Mbps Auto-MDI / MDI-X RJ-45 Ethernet port (port #4 can be configured as
WAN port for Broadband connectivity.)
• Reset button
• WPS push button
• Power jack
• Power switch
• SIM slot : (for the SIM card from Telco / ISP)
Physical Specifications
• Dimensions: 7.28" x 4.86" x 1.38"(185mm x 123.5mm x 35mm)
Application Diagram
Connect the detachable 3G/4G-LTE antennas to the two jacks on the
back of the device and make sure they are firmly screwed in.
The MAIN antenna connector is used for primary 3G/4G-LTE.
If deciding to use ONE antenna, make sure the MAIN antenna connector is being
connected at all times.
Attention