User manual

45
Connection Mode – EWAN
Step 2: Select the connection mode:EWAN. Then click Continue. Here take EWAN for example. If
you want directly go to wireless setting, please click Jump to Wireless setting and go to step 4.
Step 3: Select the Protocol.
Protocol: The current protocol in the device.
Click on Continue to choose the Protocol to connect with EWAN.
Obtain an IP Address Automatically
When connecting to the ISP, BEC 6200WZLR4/R5(3G/4G_LTE Cellular Broadband Router) also
functions as a DHCP client. The router can automatically obtain an IP address, subnet mask, gateway
address, and DNS server addresses if the ISP assigns this information via DHCP.
Protocol: The current protocol in the device
Click on the Continue button and wait for your connection to be connected.
If connection is successful the following image will be shown.