User manual
27
WAN
EWAN
Obtain an IP Address Automatically
Protocol: The current protocol in the device
Fixed IP Address
Select this option to set static IP information. You will need to enter in the Connection type, IP address,
Netmask, and gateway address, provided to you by your ISP. Each IP address entered in the fields
must be in the appropriate IP form, which are four IP octets separated by a dot (x.x.x.x). The Router
will not accept the IP address if it is not in this format.
Protocol: The current ATM protocol in the device
IP Address: Your WAN IP address. Leave this at 0.0.0.0 to automatically obtain an IP address from
your ISP.