User manual
Quick Start Guide
4
Hardware Connection
Hardware Installation
1. Power Connection
Plug in the supplied power adapter to the wall jack, the other side to the 6200WZL then
power ON the 6200WZL by pressing the Power On/Off button.
2. LAN Connection
Connect the supplied RJ-45 Ethernet cable to one of the Ethernet ports, and the other side
to the PC’s Ethernet interface.
Attention
Connect the detachable 3G/4G-LTE antennas to the two jacks on the
back of the device and make sure they are firmly screwed in.
The MAIN antenna connector is used for primary 3G/4G-LTE.
If deciding to use ONE antenna, make sure the MAIN antenna connector
is being connected at all times.