Instruction manual

5.2.2.7. Setup
Selection of Setup mode
In mode select page, select SETUP mode and press the [Enter] button.
System Setup
Language
Brightness
Contrast
Status
Load default
Description
English/Italian/German/French/Spanish/
Portuguese/Russian language selection
Change panel brightness
Change panel contrast
Day Mode / Night Mode selection.
“Night Mode” allows switching off the screen when the camera is on
standby mode and resuming the image automatically when any noise
is detected.
Restore Default Options menu
English
Calendar Setup
Sub-menu
Set Date
Use the [Up] and [Down] buttons to adjust the figures, the [Left]
and [Right] buttons to move the Day/Month/Year file. Press the
[Exit] button to give up; the [Enter] button to confirm change.
Description
- Day
- Month
- Year
Set Time
Power Auto ON
Power Auto OFF
- Hour
- Minute
- On
- Off
- On
- Off
Use the [Up] and [Down] buttons to adjust the figures, the [Left]
and [Right] buttons to move the Hour and Minute file. Press the
[Exit] button to give up; the [Enter] button to confirm change.
Use the [Up] and [Down] buttons to adjust the figures, the [Left]
and [Right] buttons to move the Hour/Minute file. “ON” represent
of the open function,” OFF” represent to close the function. Press
the [Exit] key to give up; the [Enter] button to confirm change.
Use the [Up] and [Down] buttons to adjust the figures, the [Left]
an [Right] buttons to move the Hour/Minute file. “ON” represents
the open function, “OFF” represents the end of the function.
Press the [Exit] key to give up; the [Enter] button to confirm
change.
Key function in this page
· Enter key to confirm selected item and configure it.
· Exit Key to give up selected item change, and return upper select item.
39