Specifications

TRP-C08S
USB to 1 RS232 and 1 RS422/485
Isolated Converter
USB to Serial Device
The TRP-C08S is one standard USB 2.0 to
Serials Bridge that has one DB-9 RS232 male
connectors and 4 PIN screw terminal for
RS422/485. The DB-9 pin serial port is configured
as a DTE (data terminal equipment) device which
is same as all PC COM ports. The RS422/485
with auto configuration in data format, baud rate
and RS485 data flow direction control. RS422/485
equips with 3000VDC of isolation and internal
surge-protection on each data line, it gives the
host computer and module itself entirely
protection from destructive voltage spikes and
danger of unregulated voltages input. TRP-
C08S also features a high-speed 921.6 K bps
transmission rate, and supports various O.S. The
industry DIN rail and panel mounting design
enable user a fast and professional installation.
USB-2.0 Device Controller
Allow user custom adjust baud-rates.
Each Port can impendent set up the baud-rate and
data format.
OS. system get dual port UART serial (1*RS232 and
1*RS422/485).
On-Chip 512-Byte FIFO for upstream and
downstream data transfers for serial Port.
Fully PLC support such as Mitsubishi Q,FX and
FATEK serial....
Auto direction flow control on RS-485.
Auto baud rate switching from 75bps to 921.6 Kbps.
256 byte buffer for upstream and downstream data
flow.
Direct power from USB port , no external power
necessary.
3000V DC isolated protection.
Surge protection on RS422/485 data lines.
Power and TXA/RXA/TXB/RXB communication LED
indicator .
DIN rail or panel mount support.
Driver support: WIN8/8.1,Vista64/32,Windows
98/ME/2000/XP/WIN7/CE3.0, and Linux, and Mac OS.
Input: USB 2.0.
Output: RS232 signal: Standard 9 pin DTE full-duplex.
RS422 signal: Differential 4 full-duplex wires (TX+, RX+, TX-, RX-)
RS485 signal: Differential 2 half-duplex wires (D+, D-).
Optical Isolation:RS422/485 3KV.
Data Format: Asynchronous data with any combination of bits, parity, stop
Parity type: None, odd, even mark, space.
Data bit: 5, 6, 7, 8
Stop bits: 1, 1.5, 2.
Flow Control: Xon/Xoff, Hardware, None
Cable: USB 2.0 type A to type B cable.
Communication speed:75~256Kbps.
RS422/485 line protection: Against surge, short circuit,+/- 15KV ESD and
voltage peak.
RS232 line protection: +/- 15KV ESD.
Distance: RS422/485 Up to 4000ft (1250M).
Connection type: Screw terminal for maximum AWG #12~30 wire.
Din-Rail mountable: Option.
Power consumption:130mA by USB power.
Operating environment: -10 to 50℃.
Storage temperature: -20 to 65℃.
Dimension: 151mm X 111mm X 26mm.
Weight: 375g.
Humidity: 10-90% non-condensing.
5