Specifications

TRP-C08
USB to RS232/422/485 Isolated
Converter
USB to Serial Device
The TRP-C08 allows you to connect your serial
devices to systems by using a USB interface. With
auto configuration in data format, baud rate and
RS-485 data flow direction control. TRP-C08 is
able to automatically configure RS-232, RS-422 or
RS-485 signals to baud rate without external
switch setting. TRP-C08 is equipped with 3000V
DC of isolation and internal surge-protection on
each data lines to protect the host computer and
converter against high voltage spikes, as well as
ground potential difference. TRP-C08 also
features a high-speed 256 Kb/s transmission rate,
and supports various O.S. The industry DIN rail
and panel mounting design enable user a fast and
professional installation.
Full compliance with the USB V1.0 and 2.0
specification.
System gets 1 COM port when the converter is
connected.
Auto data format detecting.
Auto direction flow control on RS-485.
Programmable baud rate from 75 bps to 6 Mbps.
RS232/422/485 Support 3KV isolation
256 byte buffer for upstream and downstream data
flow.
Direct power from USB port , no external power
necessary.
3000V DC isolated protection.
Surge protection on RS422/485 data lines.
Power/TX/RX mode LED indicator.
DIN rail or panel mount support.
Driver support: Android/ WIN 8/WIN8.1,WIN
7/Windows 98/ME/2000/XP/CE3.0, and Linux, and
Mac OS.
USB interface: Fully compliant with V1.0, 2.0 specification.
USB to serial bridge controller; Prolific PL2303TA(Version:2.1).
RS-232 signal: 5 full-duplex (TXD, RXD, CTS, RTS, GND).
RS-422 signal: Differential 4 full-duplex wires (TX+, RX+, TX-, RX-).
RS-485 signal: Differential 2 half-duplex wires (D+, D-).
Data Format: Asynchronous data with all common combination of bits, parity,
stop.
Parity type: None, odd, even mark, space.
Data bit: 5, 6, 7, 8 or 16.
Stop bits: 1, 1.5, 2.
Cable: USB type A to type B.
Communication speed: 75~6M bps.
RS-422/485 line protection: Against surge, short circuit, and voltage peak.
Transmission distance: RS-422/485 Up to 4000ft (1200M ).
Connection type: Screw terminal accepts AWG #12~30 wires.
Signal LED: Power on, TX, RX.
Direct power from USB port.
Power consumption: 1.2W.
Isolation voltage: 3000V DC.
Operating environment: -10 to 50℃ .
Storage temperature: -20 to 70℃.
Humidity: 10-90% Non-condensing.
Dimension: 151mm X 75mm X 26mm .
Weight: 375g .
4