Specifications

TRP-C39S
Fiber TO RS232/422/485 Isolated
Converter, SC 40KM
Fiber Serial Device
The TRP-C39S fiber converter allows RS-
232/422/485 signals to be bi-directionally
converted to fiber optic and extended the line
signal distance up to 40KM over single mode. By
using fiber optic transmission technology TRP-
C39S secures a stable and error free data
transmission over the industrial environments. The
high bandwidth fiber connections solve problems
with electrical noise and different ground
potentials over long transmission. TRP-C39S
support auto configuration in data format, baud
rate and RS-485 data direction flow control, it also
provides with 3000V DC isolation and internal
surge protection. The industry DIN rail and panel
mounting design enable user a fast and
professional installation.
Wide input range DC power supply.
SC single mode fiber port.
Auto direction flow control on RS-485.
Auto RS-232/422/485 signals switching.
Auto data format detecting.
Auto baud rate switching from 300bps to 115.2Kbps.
Support 3000V DC isolation protection.
Support surge protection on RS-422/485 data lines.
Power/TX/RX mode LED indicator.
Fiber transmission distance up to 40KM .
DIN rail or panel mount support.
Power Input Voltage: DC +10V to +30V.
Interface: RS-232/422/485 auto switching.
RS-232: 3 full-duplex (TXD, RXD, GND).
RS-422: Differential 4 full-duplex wires ( TX+ , RX+, TX- , and RX-).
RS-485: Differential 2 half-duplex wires (D+, D-).
Cable: Fiber cable (9/125um).
Wavelength: 1310(FPLD) nM.
Distance: Fiber up to 40KM and RS-422/485 up to 4000ft (1200M ).
RS-422/485 line protection: Against surge, short circuit, voltage peak.
Connection type: Screw terminal for maximum AWG #12~30 wires.
Power supply: Screw terminal, or external DC adapter.
Power consumption: 110mA/12V
Isolation Voltage: 3000V DC.
Operating environment: -10 to 50℃ .
Storage temperature: -20 to 70℃.
Humidity: 10~90% Non-condensing.
Dimension: 151mm X 75mm X 26mm .
Weight: 388g .
14