Specifications

TRP-C41S
Ethernet to Fiber media Converter
,SC/40KM
Fiber Media Device
TRP-C41S is a device for Ethernet extension over
fiber, it supports point-to-point and networked
systems. The high fiber bandwidth connections
solve problems with electrical noise and different
ground potentials over long transmission lines.
TRP-C41S supports 10/100Base-TX
transmissions up to 100 meters and 100Base-FX
transmissions up to 40KM . It is the perfect
solution for wide distance connections with high
immunity to electrical noise.
Wide input range DC power supply.
Plug-and-Play design for the installation within
seconds.
Compact and Rugged Metal case capable of
withstanding harsh environment.
Data rate: 10/100Mbps auto-negotiation and half-
/Full-duplex mode on TX port.
Auto MDI-X/MDI-II for 10/100Base-TX port.
Provides media conversion from UTP to Fiber Optic
media types
Supports link fault pass through function.
Supports far end fault function.
LED display to indicate the whole working status.
3 power input types: Direct USB power, external DC
adapter and screw terminal.
Support IEEE Standard: 802.3u 100BaseTX &
100BaseFX.
Cable: Fiber cable (9/125um).
One 10/100Base-TX auto-negotiation Ethernet RJ-45 port.
One 100Mbps fiber port with Single-mode SC connector.
Built in 128Kb RAM for data buffer.
Wavelength: 1550 nM.
Fiber Power:-15 ~ -8 dBm.
LED indicator: Power and power and TX and fiber link/activity, full/half,
10/100MB.
Distance : 40KM
Speed : Auto 10/100MB.
Power Consumption: 12V/160mA.
Power requirement: USB port power or DC input or screw terminal from +10
to 30V.
Operating temperature: -10 to 50℃.
Storage temperature : -20 to 70℃.
Humidity: 10-90% Non-condensing.
Dimension: 151mm X 75mm X 26mm .
Weight: 400g .
12