User Manual
73
* Factory Setting
H Pitch boost
Parameter point H allows you to set up the pitch boost function. This function causes that the faster
you move the pitch stick the more additional collective pitch will be exposed. This can be especially
useful in 3D aerobatics when very rapid pitch changes are necessary for certain ight maneuvers, as
hereby dynamically the required control stick deection will be reduced.
However, the maximum set pitch value (Setup menu setting point K) will not be exceeded.
A too high setting can cause the rotor blades to stall when giving very fast pitch command. Also the
collective pitch will feel slow and spongy, precisely cause the opposite eect as desired.
Start from the “low“ setting, gradually increasing to the desired level, until you have found your ideal
setting. How high this feature is adjustable without causing any adverse eects depends on many
factors such as maximum pitch values, pitch curve, swashplate servos, main rotor blades, system
headspeed, ... .
Status-LED Pitch boost
purple o *
red ashing low
red medium
blue ashing high
blue very high
o user dened
By pressing the button you save the setting and exit the parameter menu. Now the MICROBEAST
is ready for operation again!
The choice is made by moving the
tail stick into one direction until the
Status-LED lights in the desired color.
The option “user dened” allows you
to dene your own setting with the
PC software.