User Manual

72
* Factory Setting
G Cyclic response
With point G can be set how aggressive the MICROBEAST responds to cyclic control commands (roll
and pitch). This can reduce the usual uniform and linear control feeling of ybarless systems and
approach it to the feeling of a ybared helicopter.
If you want to use this feature, start from the “slightly increased“ setting, gradually increasing to the
desired level, until you have found your ideal setting.
A too high setting will result in uncontrollable, inaccurate rotation and deteriorating stopping
behavior of each control function.
How high this feature is adjustable without causing any adverse eects depends on many factors such
as heli size, swashplate servos, main rotor blades, main rotor speed, servo power supply and depending
on the particular heli setup.
Status-LED Cyclic response
purple normal *
red ashing slightly increased
red increased
blue ashing high
blue very high
o user dened
The choice is made by moving the tail
stick into one direction until the
Status-LED lights in the desired color.
The option “user dened” allows you
to dene your own setting with the
PC software.
Push the button to save the conguration and to proceed to parameter menu point H.