User Manual

70
E Stick deadband
At parameter menu point E you can adjust the stick dead band for elevator, aileron and rudder. The
deadband is the range around the very center of the stick where the MICROBEAST will not react. Unfor-
tunately, some on the market available transmitters have the problem that when the sticks are brought
back, after an input, to the middle position, they aren’t exactly at the same center position as before.
This generates a continuous deviation on the corresponding function, although the stick seems to be
in the middle. This deviation is interpreted as a small input by the MICROBEAST, which lead to an un-
wanted rotation on that axis.
• Ifthestickdeadbandissettolow,itisdiculttondastickpositionwherenoinputissenttothe
MICROBEAST. A too low setting here can lead to a tipping helicopter at take o, or a dicult to control
helicopter.
• Ifthestickdeadbandissettohigh,youwillfeelinthemiddlealargezonewhereyouhavenocontrol,
which makes it dicult to have precise hovering.
Status-LED Stick deadband
purple 1
red ashing 2 *
red 3
blue ashing 4
blue 5
o user dened
Push the button to save the conguration and to proceed to parameter menu point F.
The choice is made by moving the tail stick
into one direction until the Status-LED
lights in the desired color.
The option “user dened” allows you to
dene your own setting with the PC soft-
ware.
*
Factory Setting