User Manual
69
If the tail pirouettes and stops unevenly in both directions, it is recommended to set the tail gyro to
Normal-Rate mode in order to test, whether the tail will drift in a particular direction during hover. If it
does, adjust the tail link rod length accordingly, so that the tail blades have the required compensation
pitch. Do not forget, to redo the tail rotor limits (setup menu point E).
If you did choose in the parameter menu the control behavior “transmitter” please make sure that you
are not accidently entering the free spinning range which might be a reason for inconsistent rotation
rates. See note in parameter menu B (control behavior).
The option “user dened” allows you to dene your own setting with the PC software.
Push the button to save the conguration and to proceed to parameter menu point E.